-12%

AVR SX440 Automatic Voltage Regulator with Hard Shell for Stamford Generator

STAMFORD

  • SX440 is a two phase sensed Automatic Voltage Regulator(AVR)
  • Input:190-264V ac max, 1 phase 2 wire
  • Output:max 120V/DC
  • Regulation: +/-1%
  • Vibration:20 -100HZ (50mm/sec), 100Hz -2kHz
  • Click Here To Download SX440 User Manual

 14,500.00  16,500.00

Compare

Buy all Stamford AVRs and Rotating Rectifier assembliesin Pakistan. You can buy AVR SX440 automatic voltage regulator with hard shell for Stamford generator online anywhere from Pakistan or by visitingElectronic Power House(EPH) andTetralink Technologies(TLT) in Lahore who are the main distributor of Stamford in Pakistan. All original Stamford products are available at very reasonable and best prices in Pakistan

Key Features:

  • SX440 is a two-phase sensed Automatic Voltage Regulator(AVR)
  • Input:190-264V ac max, 1 phase 2 wire
  • Output:max 120V/DC
  • Regulation: +/-1%
  • Vibration:20 -100HZ (50mm/sec), 100Hz -2kHz

General description

SX440 is a half-wave phase-controlled thyristor-type Automatic Voltage Regulator (AVR) and forms part of the excitation system for a brush-less generator.
In addition to regulating the generator voltage, the AVR circuitry includes under-speed and sensing loss protection features. Excitation power is derived directly from the generator terminals.
Positive voltage builds up from residual levels is ensured by the use of efficient semiconductors in the power circuitry of the AVR.
The AVR is linked with the main stator windings and the exciter field windings to provide closed-loop control of the output voltage with load regulation of +/- 1.0%.
In addition to being powered from the main stator, the AVR also derives a sample voltage from the output windings for voltage control purposes. In response to this sample voltage, the AVR controls the power fed to the exciter field, and hence the main field, to maintain the machine output voltage within the specified limits, compensating for load, speed, temperature, and power factor of the generator.
A frequency measuring circuit continually monitors the generator output and provides output under-speed protection of the excitation system, by reducing the output voltage proportionally with speed below a pre-settable threshold. A manual adjustment is provided for the factory setting of the under frequency roll-off point, (UFRO). This can easily be changed to 50 or 60 Hz in the field by push-on link selection.
Provision is made for the connection of a remote voltage trimmer, allowing the user to fine control the generator’s output. Analog input is provided allowing connection to a Newage Power Factor controller or other external devices with compatible output. The AVR has the facility for droop CT connection, to allow parallel running with other similarly equipped generators.

 

Design Detail

brands

STAMFORD

color

Black

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “AVR SX440 Automatic Voltage Regulator with Hard Shell for Stamford Generator”

There are no reviews yet.