Welcome to Tetralink Technologies
Sale!

EPH300A AMF Auto Mains Failure Controller For Generator

5,000

Key Features

  • Microprocessor controlled
  • Low oil pressure protection
  • Automatic fuel control and start
  • Over-speed and under-speed protection
  • Automatic shutdown on fault condition
  • LED display for fault monitoring
  • Survive cranking drop-outs
  • Two-part connector for easy replacement
  • Manual fuel control and start
  • Standard panel dimensions (96x96mm)
  • High engine temperature protection
  • Low cost
  • Low failure rate

EPH300A AMF Genset Controller

Buy all EPH Genset controllers, energy meters,  panel meters,  synchronization controllers, auto mains failures (AMF), auto transfer switches (ATS), generator battery chargers, etc. in Pakistan. You can buy EPH300A AMF Auto Mains Failure Controller For Generator of EPH online anywhere from Pakistan or by visiting Electronic Power House (EPH) and Tetralink Technologies (TLT)   in Lahore. We are the manufacturer of EPH controllers in Pakistan.  We have all original EPH Genset controllers and AVRs ready in stock. All international & local brands of generator controllers are also available at very reasonable and best prices in Pakistan.

Key Features of EPH300A AMF

  • Microprocessor controlled
  • Low oil pressure protection
  • Automatic fuel control and start
  • Over-speed and under-speed protection
  • Automatic shutdown on fault condition
  • LED display for fault monitoring
  • Survive cranking drop-outs
  • Two-part connector for easy replacement
  • Manual fuel control and start
  • Standard panel dimensions (96x96mm)
  • High engine temperature protection
  • Low cost
  • Low failure rate

 

Description of EPH300A AMF

The EPH model EPH300A is a microprocessor-based control unit that is specially designed for Genset. It is used to start and stop the Genset in automatic or manual mode via user-friendly push buttons on the front panel.

In Automatic mode, EPH300A AMF monitors 3-phases of the mains supply R, S, T, and automatically starts and stops Genset in the absence of any phase of the mains supply. Once the generator is started, it monitors internal protections and external fault inputs like low oil pressure (O/S) and over-temperature (T/S).  If a fault condition occurs, the unit shutdowns the engine automatically and indicates the fault condition with the corresponding blinking red led lamp on the front panel.

If you wish to start the Genet manually, press the MANUAL push button on the front panel. This condition will be indicated by the associated LED.

The fault conditions are continuously monitored by the unit when the engine is running. The unit automatically shut down the engine as it finds any alarming condition in the Genset. These faults are identified with the help of LEDs on the front panel.

The occurrence of below fault conditions will cause the engine to be shut down immediately.

  • Fail to start.
  • High engine temperature.
  • Low oil pressure.
  • Under Speed.
  • Over speed.

 If a fault condition occurs, the FUEL solenoid will be de-energized and the LED associated with this condition will start blinking.

Only one fault will be indicated by the LEDs which occurred first.  After removing the fault, press the RESET button on the front panel and again select the AUTO/MANUAL mode.

The engine could be shut down by pressing the RESET button on the front panel at any time.

 INSTALLATION of EPH300A

The control panel is designed to provide user-friendliness for both the installer and the user.

The unit is designed for panel mounting. The user should not be able to access parts of the unit other than the front panel.

Mount the unit on a flat, vertical surface. The unit fits into a standard panel meter opening of 92×92 millimeters. Before mounting, press the plastic locks and the plug connectors from the unit, and then pass the unit through the mounting opening. The unit will be maintained in its position by the plastic locks.

Connection Diagram of EPH300A

 

 

brands

EPH

Color

Green

Reviews

There are no reviews yet.

Be the first to review “EPH300A AMF Auto Mains Failure Controller For Generator”

Your email address will not be published. Required fields are marked *

You may also like…

  • Sale! EPH-102C AMF Auto Mains Failure

    EPH-102C AMF Auto Mains Failure Card For Generator

    2,200

    Key Features

    • Microprocessor controlled
    • Low oil pressure protection
    • Automatic fuel control and start
    • Automatic shutdown on fault condition
    • LED Indications for fault monitoring
    • Screw type connectors for easy connection
    • Survive cranking drop-outs
    • High engine temperature protection
    • Manual fuel control and start
    • Low cost
    • Adjustable times as per Gen Req.
    • Low failure rate 
    • Low cost
    • Low failure rate
    Add to cart
  • Sale!

    DKG307 Automatic Mains Failure Unit

    22,500

    Key Features

    • True RMS measurementss
    • ECU connection through J1939 CAN option -for CAN version Only
    • MPU input option for MPU Version Only
    • Dual genset mutual standby operation
    • Event logging with time stamp and measurements
    • Battery backed-up real-time clock
    • Built-in daily/weekly / monthly exerciser
    • Weekly operation schedule programs
    • Field adjustable parameters
    • RS-232 serial port
    • Free MS-Windows Remote monitoring SW
    • Customer logo display capability
    • 10ADC relay outputs
    • Configurable analog inputs: 4
    • Configurable digital inputs: 7
    • Configurable relay outputs: 2
    • Total relay outputs: 6
    • I/O expansion capability
    • Plug-in connection system
    • Click Here To Download DKG307 User Manual
    Add to cart
  • Sale! DKG105 Datakom Genset Controller

    DKG105 AMF Unit (Automatic Mains Failure Controller)

    5,500

    Key Features

    • Automatic engine starting and stopping
    • Gas engine support
    • Automatic mains failure monitoring
    • Automatic load transfer
    • Automatic shutdown on fault condition
    • Provision for energizing to stop, preheat & choke outputs
    • Mains phases voltage limits checking
    • Generator phase voltage limits checking
    • Delayed over-speed and under-speed alarm
    • Digitally adjustable low & high mains voltage limits
    • Digitally adjustable low & high generator voltage limits
    • Digitally adjustable under-speed & over-speed limits
    • Digitally adjustable delay for speed alarm
    • Digitally adjustable timers
    • Digital display of mains & generator voltages
    • Digital display of generator frequency
    • Digital engine run-hours display
    • Plug-in connection system for easy replacement
    • Low cost
    • Small dimensions
    • Standard panel dimensions, (72x72mm)
    • Click Here To Download DKG105 User Manual
    Add to cart
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Compare
Wishlist 0
Open wishlist page Continue shopping