Search results: “eph” – Page 2

 Key Features :

1. Sensor Type: Inductive
2. Sensing distance: 0.079″ (2mm)
3. Output Type:  NPN-NO, 3-Wire
4. Response Frequency: 1.5kHz
5. Shielding: Shielded
6. Material: Nickel-Plated Brass
7. Voltage: 10V ~ 40V
8. Termination style: Cable leads
9. Operating Temperature: -40°C ~ 85°C
10. Package/case: Cylinder, Threaded – M12
11. Ingress Protection: IP67
12. Indicator: LED

 Key Features :

1. Piezo sounders contain a piezoelectric vibration plate (also known as a piezo element) within a molded case.
2. Sound is emitted when a voltage is applied and the piezo element inside the case vibrates.
3. Piezo buzzers generally use less current.
4. Have a higher sound output and a wider operating voltage.
5. Buzzers and Sounders can also be split into Audio Indicators and Audio Transducers.

 Key Features :

1. Product use: rain, rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO.
   The sensor USES the high quality FR – 04 double material, large area of 5.5 * 4.0 CM, treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance;
   The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA;
   With potentiometer sensitivity adjustment
   The working voltage of 3.3 V to 5 V
   The output format: digital switch output (0 and 1) and analog AO voltage output;
   Has a fixed bolt hole, convenient installation
   Small board PCB size: Approx. 3.2 cm x 1.5 cm
   The LM393, use of wide voltage comparator

 Key Features :

1. PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
2. Interface definition directly marked on the shell, clear, convenient and practical!
3. 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
4. Shell characters using laser engraving, never fade off! Permanent clarity!
5. 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
6. Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working condition!
7. With 4 DuPont line, so you can easily respond to different target board line order!
8. Use anti-static bag packaging.

 Key Features :

1. Two independent Potentiometer: one for each axis ( X and Y)
2. Auto return to the center position
3. Low weight
4. Cup-type Knob
5. Compatible to interface with Arduino or with most microcontrollers

 Key Features :

• Ceramics thermoelectric Cooler semiconductor module TEC1-12706
• Small module.
• Its work is characterized by side refrigeration and side fever.
• Hot and cold on both sides of the temperature difference of 68 degrees
• Connected to the 12-volt power supply cooling piece on both sides there will be the difference in temperature, side cold side of the heat, do not long power cooler radiator, otherwise, it will cause cooler internal overheating and burning.
• Quality tested cooling cells.
• Solid-state, vibration-free, noise-free.
• Simple to install and operate.
• Fitted with 6-inch insulated leads

 Key Features :

1. 1. 1. sensor adopts TR5000, high sensitivity
      2. sensitivity adjustable digital potentiometer to adjust (blue)
      3. modules can induction block from 0 to 3 cm
      4. 5 V working voltage of 3.3 V
      5. 5a output form the output analog voltage (0 to 5 v) B digital switch output (0 and 1)
      6. Has a fixed bolt hole, the work of the installation
      7. Small board PCB size: 3.5 cm * 1.5 cm
      8. The power indicator light (red) and digital switch output indicator light (green)
      9. Comparator USES the LM393 chips, work stability
      10. Three small plate interface specifications wire (4)
      11. 1 VCC external 3.3 V to 5 V
      12. 2 GND external GND
      13. 3 DO small plate digital output interface (0 and 1)
      14. 4 small AO plate analog output interface (0 to 5 v)