Search results: “eph”
Showing 1–28 of 98 results
-
Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.
TP4056 type-C Lithium Battery Charging Board
-10%Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.TP4056 type-C Lithium Battery Charging Board
- Inputs with Type C female, can be directly input to do with the phone charger rechargeable lithium battery,
- And still retains the input voltage wiring pads, can be very convenient DIY
- Input voltage: 5V
- Charging cut-off voltage: 4.2V ± 1%
- Maximum charge current: 1000mA
- Battery over-discharge protection voltage: 2.5V
- Battery overcurrent protection current: 3A
- Board size: 2.6 * 1.7CM
SKU: n/a -
Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.
WDD35D4 6mm Round Shaft Rotary Wire Wound Potentiometer 5K Ohm 2Watt
-11%Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.WDD35D4 6mm Round Shaft Rotary Wire Wound Potentiometer 5K Ohm 2Watt
- Brand Name: WDD35D4
- Rated Power:2W
- Resistance Tolerance:0.5%
- Type:Conductive Plastic Potentiometer
- Model Number:WDD35D-4 5K
- Technology:Metal Alloy
- Standard Resistance:5K
- Outer diameter: 36.5mm
- Shaft: 6mm
- Independence linearity: 0.5%
- Theoretical electrical angle: 345 deg 2 degree
- Resolution: Unlimited
- Temperature Coefficient of Resistance (ppm/degree): <400
- Operating temperature range: -55 degree to +125 degree
- Mechanical angle: 360 degree
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIMPlus630-46624V Controller for Generator
-18%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIMPlus630-46624V Controller for Generator
Key Features
- 630-089 EIM (PREVIOUSLY 630-466) Interface 630-466 for gensets 24V
- 630-089 EIM is PREVIOUSLY 630-466
- The Engine Interface Module is a sealed engine mounted module that provided switching relays for the starter motor solenoid, glow plug and fuel solenoid.
- Use of the EIM 630-466 PLUS means that heavy currents such as fuel solenoid power are isolated from the control panel thus enabling individual protection of each of the circuits.
- Engine interface ModuleEIMPLUS630-46624V controller
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIM Basic MK3258-975524V Controller for Generator
-11%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIM Basic MK3258-975524V Controller for Generator
Key Features
- Emergency Stop Low-Lub oil pressure Speed
- Manual Start/stop Charge Failure Voltage of battery
- Distance Start/Stop Emergency STOP Lub Oil pressure
- Preheat Control High temperature of cooling water Operation time
- Stop/idle control High Speed/Start and stop failure Voltage/Current
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIMPlus630-46512V Controller for Generator
-11%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIMPlus630-46512V Controller for Generator
Key Features
- 630-088 EIM (PREVIOUSLY 630-465) Interface 630-465 for gensets 12V
- 630-088 EIM is PREVIOUSLY 630-465
- The Engine Interface Module is a sealed engine mounted module that provided switching relays for the starter motor solenoid, glow plug and fuel solenoid.
- Use of the EIM 630-465 PLUS means that heavy currents such as fuel solenoid power are isolated from the control panel thus enabling individual protection of each of the circuits.
- Engine interface ModuleEIMPLUS630-46512V controller
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIM Basic MK3258-975312V Controller for Generator
-8%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIM Basic MK3258-975312V Controller for Generator
Key Features
- Emergency Stop Low-Lub oil pressure Speed
- Manual Start/stop Charge Failure Voltage of battery
- Distance Start/Stop Emergency STOP Lub Oil pressure
- Preheat Control High temperature of cooling water Operation time
- Stop/idle control High Speed/Start and stop failure Voltage/Current
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ Accessories
Bridge Rectifier Module 160MT160KB IR
-29%Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ AccessoriesBridge Rectifier Module 160MT160KB IR
Key Features
- Manufacturer: IR
- Type of bridge rectifier: Three-phase
- Max. off-state voltage: 1.6kV
- Load current: 160A
- Max. forward impulse current: 1.43kA
- Electrical mounting: Screw
- Version: module
- Max. forward voltage: 1.49V
- Leads: M5 screws
- Case: MT-K
- Mechanical mounting: Screw
- Click Here To Download 160MT160 KB Data sheet
SKU: n/a -
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ Accessories
M50100THC1600 and M50100THA1600 Crydom Mexico 100A 1600V Bridge (Pair)
-10%Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ AccessoriesM50100THC1600 and M50100THA1600 Crydom Mexico 100A 1600V Bridge (Pair)
Key Features
- 3-Phase Positive and Negative Pair
- 100A/1600V Diode Module
- High Surge Current Rectifier Circuits
- 5 Different Circuits to Choose from
- Up to 1600 Volt Blocking Standard
- UL Recognized E72445
SKU: n/a -
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ Accessories
Rotating Bridge Rectifier For Leroy Somer Generators 33025777-Copper
-25%Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ AccessoriesRotating Bridge Rectifier For Leroy Somer Generators 33025777-Copper
Key Features
- Diode Bridge rectifier
- SSAYEC432, 33025777
- Diode Bridge 432, Diode Bridge rectifier
- Facon 330-25777 is designed for generator
- Diode Bridge 432 is designed for generator
- Diode bridge rectifier
- 330-25777 is designed for Somer generator
- Diode Bridge 432 is designed for SF generator
- Diode Bridge Facon 330-25777 is designed for LS generator
SKU: n/a -
Automatic Voltage Regulators (AVRs)
AVR EA05 Generator Automatic Voltage Regulator
Key Features
- Sensing Input: Voltage 220 / 380 / 440 VAC, 1 phase2 wire DIP switch selectable
- Frequency: 50 / 60 Hz, DIP switch selectable
- Power Input Voltage: 100 ~ 300 VAC, 1 phase 2 wire
- Output Voltage: Max. 90 VDC @ 240 VAC input
- Current Continuous: 5A Intermittent 7A for 10 sec
- Resistance: Min. 15 ohm Max. 100 ohm
- Voltage Regulation: < 0.5% ( with 4% engine governing )
- Voltage Build-up: Residual voltage at AVR terminal > 5 VAC
- Thermal Drift: 0.03% per C change in AVR ambient
- Click Here To Download EA05 User Manual
SKU: n/a -
Automatic Voltage Regulators (AVRs)
AVR EA04C Generator Automatic Voltage Regulator
Key Features
- Sensing & power Input: Voltage 160 ~ 265 / 300 ~ 550VAC DIP switch selectable
- Frequency: 45 / 55 Hz, selectable
- Output Voltage: Max. 63 VDC @ 240 VAC input
- Current: Continuous 4A Intermittent 7A for 60 sec.
- Resistance: Min. 15 ohm Max. 100 ohm
- Voltage Regulation: < 1% ( with 4% engine governing )
- Voltage Build-up: Residual voltage at AVR terminal > 5 VAC
- Dimensions: 101mm L * 69mm W * 47.3mm H
- Weight: 175 g 2%
SKU: n/a -
Automatic Voltage Regulators (AVRs)
DSR Mecc Alte Automatic Voltage Regulator AVR For Generator
Key Features
- Full digital controlled regulator, based on DSP
- On-board machine installation
- Suitable for all self-regulated alternators
- Voltage supply: 40Vac270Vac (from auxiliary winding, output voltage or PMG)
- Frequency range: 12Hz 72Hz
- Sensing of voltage with true RMS or average measurement (70280 Vac)
- Maximum continuous output current: 5Adc;
- Precision of voltage regulation: 1% from no-load to nominal load
- Click Here To Download DSR User Manual
SKU: n/a -
Automatic Voltage Regulators (AVRs)
AVR EA16-400Hz Generator Automatic Voltage Regulator
Key Features
- Voltage Regulation < 0.5%
- Suitable For Brushless Type Generator Sensing Input 170~510 VAC
- Can Be Used In Parallel Operation
- 16 ADC Current Output
- Suitable Frequency 400 Hz
- Soft Start Voltage Ramping
- Load CT Current Compensation, Analogue Voltage Input
- Click Here To Download EA16-400Hz User Manual
SKU: n/a -
Automatic Voltage Regulators (AVRs)
AVR EA16 Generator Automatic Voltage Regulator
Key Features
- Sensing Input Voltage: 170 ~ 510 VAC, Single Phase 2 wires Voltage is DIP Switch selectable
- Frequency: 50/60 Hz, DIP Switch selectable
- Power Input: Voltage 60 ~ 300 VAC, Single Phase 2 wires
- Output Voltage: Max. 90 VDC @ 240 VAC input
- Current: Continuous16A, Intermittent 20A for 10 sec
- Click Here To Download EA16 User Manual
SKU: n/a -
Automatic Voltage Regulators (AVRs)
AVR M16FA655A Automatic Voltage Regulator For Generator
Key Features
- Replacement part number: M16FA655A
- The voltage regulator type MARK V
- It is s suitable for Synchronous Generators of MARELLI MOTORI
- The regulator is fully insulated in order to maintain high reliabilityalso with severe
ambient conditions (high level of humidity, dust, salt atmosphere), and in case of high vibrations level. - The regulator is proper both for single and 3-phase generators.
- Click Here To Download M16FA655A User Manual
SKU: n/a