Unbeatable Offer
Save 6%
-6%
Active Low Level Trigger Buzzer Alarm Module
₨ 75.00-
Arduino, Arduino Boards & Components, Development Kits
Esp8266 Ch340 Lolin Nodemcu V3 Wifi Development Board Iot
-2%Arduino, Arduino Boards & Components, Development KitsEsp8266 Ch340 Lolin Nodemcu V3 Wifi Development Board Iot
Key Features :
-
-
- Uses CH340G instead of CP2102.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Don’t need to download resetting
- A great set of tools to develop NODEMCU
- Lowest cost WI-FI
- FOR Arduino like hardware IO
- Greatly speed up your IOT application developing process
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- WI-FI MCU ESP12E integrated and easy to the prototyping development kit.
- We provide the best platform for IoT application development at the lowest cost.
- NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
- Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
- Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
-
SKU: n/a -
-
Electrical Instruments, Multimeters, Tools & Hardware
UT33C+ Handheld Digital Multimeter in Pakistan
-12%Electrical Instruments, Multimeters, Tools & HardwareUT33C+ Handheld Digital Multimeter in Pakistan
Key Features
- Ideal for measuring voltage, current, diode, resistance, temperature, etc.
- Easy to read with LCD display design
- Small size, convenient to hold and carry
- Safe and reliable to use with a protection system
- Powered by 2 x AAA 1.5V battery ( not included )
- High sensitivity and accuracy for a variety of measurements
SKU: n/a -
Electronic Governors
S6700H Engine Speed Control Unit for Generators
Key Features:
- Speed control Unit S6700H is an All-Electronic Device Designed to control engine speed with fast and precise response to transient load changes
- Actuator default protection
- Speed signal Lose protection
- Over-speed & External high Level input Alarm
- High reliability and can withstand all kinds of electromagnetic interference around the engine
- Easy to install, you can adjust the working speed in advance to meet your requirements
- Prevent reverse battery voltage, instantaneous pulse voltage. So as not to damage the machine
- Fast and precise response, able to recognize momentary symbol changes
- Fully electronic closed-loop design and control of a wide range of engines
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TT Motor Dc 3v 6v Dc Gear Motor
Key Features :
- DIY Projects
- Battery-operated toys
- Disk drives Steel rolling mills Paper
- Machines Medical equipment
- Radio-controlled aircraft
- Automobiles Drive systems Positioning
- Industrial and consumer actuators Winches Robotics Mixers
- Robotic projects
SKU: n/a -
Genset Products, Synchronization Units
DKG117 Synchroscope And Check Synch Relay
Key Features
- 24 led circular synchroscope
- Programmable V, f, for check synch relay
- 1 phase Genset voltage input
- 1 phase busbar voltage input
- Synch Check Enable input
- Dead Bus Enable input
- Auto power off
- Adjustable parameters
- Front panel configurable
- Survives cranking dropouts
- LED displays
- Sealed front panel
- Plug-in connection system for easy replacement
- Small dimensions (72x72x52mm)
- Low cost
- Click Here To Download DKG117 User Manual
SKU: n/a
-
Arduino, Arduino Boards & Components, Development Kits
Arduino Uno R3 SMD with USB Cable
Key Features
- The operating voltage is 5V
- The recommended input voltage will range from 7v to 12V
- The input voltage ranges from 6v to 20V
- Digital input/output pins are 14
- Analog i/p pins are 6
- DC Current for each input/output pin is 40 mA
- DC Current for 3.3V Pin is 50 mA
- Flash Memory is 32 KB
- SRAM is 2 KB
- EEPROM is 1 KB
- CLK Speed is 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Nano
Key Features
- MICROCONTROLLER: ATmega328
- ARCHITECTURE: AVR
- OPERATING VOLTAGE: 5 V
- FLASH MEMORY: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- CLOCK SPEED: 16 MHz
- ANALOG IN PINS: 8
- EEPROM: 1 KB
- DC CURRENT PER I/O PINS: 40 mA (I/O Pins)
- INPUT VOLTAGE: 7-12 V
- DIGITAL I/O PINS: 22 (6 of which are PWM)
- PWM OUTPUT: 6
- POWER CONSUMPTION: 19 mA
- PCB SIZE: 18 x 45 mm
- WEIGHT: 7 g
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Pro Mini 5V 16MHz
Key Features
- Microcontroller: ATmega328
- Board Power Supply: 5 – 12 V (5V model)
- Circuit Operating Voltage: 5V
- Digital I/O Pins: 14
- PWM Pins: 6
- UART: 1
- SPI: 1
- I2C: 1
- Analog Input Pins: 6
- External Interrupts: 2
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32KB of which 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Genset Products, Synchronization Units
DSE8610-MKII Synchronization Controller
Key Features
- Multi Genset synch & load share
- AMF unit (uninterrupted transfer)
- ATS unit (uninterrupted transfer)
- Remote start controller
- Manual start controller
- Engine controller
- Remote display panel
- Comprehensive synchronizing & load sharingcapabilities
- Built-in governor and AVR control
- Baseload (kW export) control
- Positive & negative kVAr export control
- Mains (Utility) decoupling protection
- 4-Line backlit LCD text display
- CAN AVR support
- Click Here To Download DSE8510-MKII User Manual
- Click Here To Download DSE8610-MKII Config. Suite PC Software Manual
SKU: DSE8610-MKII
-
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
Key Features
- Back-lit icon LCD display
- Front panel editing
- LED and LCD alarm indication
- Power Save mode
- PC configurable
- 6 Digital inputs
- 4 Outputs (2 configurable)
- Configurable timers and alarms
- Remote Start input
- Generator voltage display
- Generator frequency display
- Battery voltage display
- Engine speed display
- Hours counter
- Engine pre-heat
- Click Here To Download DSE3110 User Manual
- Click Here To Download DSE3110 Data Sheet
SKU: n/a -
Genset Products, Synchronization Units
DSE8610-MKII Synchronization Controller
Key Features
- Multi Genset synch & load share
- AMF unit (uninterrupted transfer)
- ATS unit (uninterrupted transfer)
- Remote start controller
- Manual start controller
- Engine controller
- Remote display panel
- Comprehensive synchronizing & load sharingcapabilities
- Built-in governor and AVR control
- Baseload (kW export) control
- Positive & negative kVAr export control
- Mains (Utility) decoupling protection
- 4-Line backlit LCD text display
- CAN AVR support
- Click Here To Download DSE8510-MKII User Manual
- Click Here To Download DSE8610-MKII Config. Suite PC Software Manual
SKU: DSE8610-MKII -
Genset Products, Manual & Remote Start Units
GTR-168 Manual & Auto Genset Controller With Key Switch
-17%Genset Products, Manual & Remote Start UnitsGTR-168 Manual & Auto Genset Controller With Key Switch
Key Features
- Automatic/Manual engine starting and stopping
- Gas engine support
- Emergency / Auxiliary engine shutdown
- Low battery warning
- Over speed shutdown
- High water temperature shutdown
- Low oil pressure shutdown
- Survives cranking dropouts
- Key switch to avoid unauthorized access
- ATS Auto Start function by detecting ATS terminal 12 grounded
- Plug-in connection system for easy replacement
- Low cost
- Small dimensions
- Standard panel dimensions, (72x72mm)
- Click Here To Download GTR-168 User Manual
SKU: n/a
Products Grid
Crazy Discounts
Best Sellers
-
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
₨ 18,500.00₨ 22,000.00
-
Genset Products, Manual & Remote Start Units
DKG116 Manual And Remote Start Unit
₨ 14,500.00₨ 15,000.00 -
Genset Products, Synchronization Units
DKG117 Synchroscope And Check Synch Relay
₨ 15,000.00₨ 16,500.00 -
-
Genset Products, Manual & Remote Start Units
DKG317 Manual And Remote Start Unit
₨ 27,000.00₨ 30,000.00 -
Auto Transfer Switches (ATS), Genset Products
DKG325 Genset Control & ATS Panel
₨ 35,000.00₨ 40,000.00
Recently Added
Arduino, Arduino Boards & Components, Development Kits
MPU 6050 3 Axis Digital Gyroscope Accelerometer Sensor Module
-3%
Arduino, Arduino Boards & Components, Development Kits
MPU 6050 3 Axis Digital Gyroscope Accelerometer Sensor Module
Key Features :
Build in ultra low noise linear LDO voltage regulator
Build-in on board filters, which reduce noise from motor and other high current electronics
All sensors connected to I2C bus
You can easily select two I2C address for MPU6050 by soldered jumper
Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
Digital Motion Processing™ (DMP™) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection
Embedded algorithms for run-time bias and compass calibration. No user intervention required
Power LED
Input Voltage: 2.3 – 3.4V
Build in Logic level converter for I2C
Digital-output temperature sensor
Dimensions 20x16mm
Designed for 5V logic level
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Active Low Level Trigger Buzzer Alarm Module
-6%
Arduino, Arduino Boards & Components, Development Kits
Active Low Level Trigger Buzzer Alarm Module
Key Features :
Product Name:3.3 to 5V Active Buzzer Alarm Module Sensor And 3 Pin TTL Cable
The Transistor drive module uses 8550
With fixed bolt hole- easy installation- 2.6mm aperture.
Operating voltage 3.3V-5V
PCB dimensions: 34.28 mm (L) * 13.29 mm (W) * 11.5 mm (H)
Wire length: 20.5cm
Weight: 7 gm.
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Micro SD TF Card Reader Adapter Module for Arduino
-3%
Arduino, Arduino Boards & Components, Development Kits
Micro SD TF Card Reader Adapter Module for Arduino
Key Features :
Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
Control Interface: GND, VCC, MISO, MOSI, SCK, CS
Size: 45 x 28mm
Net weight: 6g
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
DHT11 Temperature And Humidity Sensor
Key Features :
Low power consumption.
DHT11 sensor adopts
The module can detect the surrounding environment of the humidity and temperature
High reliability and excellent long-term stability
The output from the digital output
Has a fixed bolt hole and easy installation
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
CP-2102 Usb To Serial Usb To Uart Ttl Serial Module
-2%
Arduino, Arduino Boards & Components, Development Kits
CP-2102 Usb To Serial Usb To Uart Ttl Serial Module
Key Features :
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector.
6pins for 3.3V, RST, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40 to +85.
Size: 42mm X 15mm.
Weight: 4g
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Proximity Sensor E18-D80NK Infrared Yellow NPN-NO with cable
-2%
Arduino, Arduino Boards & Components, Development Kits
Proximity Sensor E18-D80NK Infrared Yellow NPN-NO with cable
Key Features :
Sensor Type: Inductive
Sensing distance: 0.079″ (2mm)
Output Type: NPN-NO, 3-Wire
Response Frequency: 1.5kHz
Shielding: Shielded
Material: Nickel-Plated Brass
Voltage: 10V ~ 40V
Termination style: Cable leads
Operating Temperature: -40°C ~ 85°C
Package/case: Cylinder, Threaded – M12
Ingress Protection: IP67
Indicator: LED
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Water Pump 5V
Key Features :
Operating Current : 130 ~ 220mA
Operating Voltage : 2.5 ~ 6V
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Driving Mode : DC, Magnetic Driving
Continuous Working Life : 500 hours
Material : Engineering Plastic
Outlet Outside Diameter : 7.5 mm
Outlet Inside Diameter : 5 mm
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
CH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
-6%
Arduino, Arduino Boards & Components, Development Kits
CH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
Key Features :
Dimensions: 53 x 18 x 7 (LxWxH) mm.
Weight: 6gm.
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output, easy to connect to your MCU.
Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
Microcomputer with cold start reset button
Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
USB to TTL conversion board used for STC microcontroller download DVD/ hard disk/router /GPS upgrade
For STC Download: SCM must be a minimum system and external crystal oscillator
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Heart Puls Sensor
Key Features :
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Active Piezo Buzzer 3v To 12V Active Buzzer for Arduino
-7%
Arduino, Arduino Boards & Components, Development Kits
Active Piezo Buzzer 3v To 12V Active Buzzer for Arduino
Key Features :
Piezo sounders contain a piezoelectric vibration plate (also known as a piezo element) within a molded case.
Sound is emitted when a voltage is applied and the piezo element inside the case vibrates.
Piezo buzzers generally use less current.
Have a higher sound output and a wider operating voltage.
Buzzers and Sounders can also be split into Audio Indicators and Audio Transducers.
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Laser Diode Module 650nm 5v Laser Light Module Ky008
-10%
Arduino, Arduino Boards & Components, Development Kits
Laser Diode Module 650nm 5v Laser Light Module Ky008
Key Features :
Voltage: 3.0 V – 5 V.
Output: red laser straightly(650nm).
Driver: APC circuit.
Size: Φ 12.0 x35mm.
Line length: about 135 mm.
Transmit power: 58mW.
Operating Current: 40mA.
Operating temperature: -36 ~ 65◦C.
Pot size: 15 meters spot for φ10 mm ~ φ15.
Outer diameter: 6 mm.
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Recording And Playback Module (Isd1820) With On Board Mic And Loud Speaker
-3%
Arduino, Arduino Boards & Components, Development Kits
Recording And Playback Module (Isd1820) With On Board Mic And Loud Speaker
Key Features :
The main chip: ISD1820.
Dimensions : 43 x 34 x 11 (LxWxH) mm.
The working voltage: DC 3V-5V.
Loudspeaker: 8 Ohm, 0.5W.
An easy to use 10 seconds of voice recording.
High-quality, natural voice restored.
Can be used as propaganda module.
With looping, jog playback, single-pass play function.
Available single-chip control.
This module can directly drive a small speaker 8 ohm 0.5W.
Power supply : 3-5V, which can be accessed pin power.
Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Rain Drops Detection Sensor
Key Features :
Product use: rain, rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO.
The sensor USES the high quality FR – 04 double material, large area of 5.5 * 4.0 CM, treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance;
The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA;
With potentiometer sensitivity adjustment
The working voltage of 3.3 V to 5 V
The output format: digital switch output (0 and 1) and analog AO voltage output;
Has a fixed bolt hole, convenient installation
Small board PCB size: Approx. 3.2 cm x 1.5 cm
The LM393, use of wide voltage comparator
The sensor USES the high quality FR – 04 double material, large area of 5.5 * 4.0 CM, treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance;
The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA;
With potentiometer sensitivity adjustment
The working voltage of 3.3 V to 5 V
The output format: digital switch output (0 and 1) and analog AO voltage output;
Has a fixed bolt hole, convenient installation
Small board PCB size: Approx. 3.2 cm x 1.5 cm
The LM393, use of wide voltage comparator
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
DHT22
Key Features :
High precision
Capacitive type
Full range temperature compensated
Relative humidity and temperature measurement
Calibrated digital signal
Outstanding long-term stability
Extra components not needed
Long transmission distance
Low power consumption
4 pins packaged and fully interchangeable
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
Hc-SR 501 PIR Motion Sensor
Key Features :
Infrared Sensor with Control Circuit Board
The Sensitivity and Holding Time Can be Adjusted
Blockade time: 2.5s (Default)
Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
St-link V2 Programmer For STM8 and STM 32
Key Features :
PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
Interface definition directly marked on the shell, clear, convenient and practical!
5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
Shell characters using laser engraving, never fade off! Permanent clarity!
500MA internal resettable fuse, complete protection of your expensive computer motherboard!
Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working condition!
With 4 DuPont line, so you can easily respond to different target board line order!
Use anti-static bag packaging.
SKU: n/a
Arduino, Arduino Boards & Components, Development Kits
LDRLight Sensor Ky-018
Key Features :
Dimensions: 33 x 115 x 8(L x W x H ) mm.
Weight: 4gm.
main chip: LM393.
working voltage: DC 3-5V
Signal output indicator light.
LDR module 4 PIN
Operating voltage 3.3V-5V
Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
Output: DO digital switch output (0 and 1), AO analog voltage output Compatible with Arduino, Raspberry and other microcontroller board.
SKU: n/a