-8%
, , ,

DKG109 Automatic Mains Failure Unit

DATAKOM

Key Features

  • True RMS measurements
  • Automatic mains failure
  • Engine control
  • Generator protection
  • 3 phase mains voltage inputs
  • 1 phase genset voltage inputs
  • 1 phase genset CT inputs
  • Engine oil pressure measurement
  • Engine coolant temperature measurement
  • Fuel level measurement
  • Genset active power measurement
  • Genset power factor measurement
  • Engine rpm display
  • Remote Start operation available
  • Mains simulation input
  • Engine Idle speed control
  • Periodic maintenance request
  • Engine hours counter
  • 128×64 graphic LCD display
  • Click Here To Download DKG109 User Manual

 55,000.00  60,000.00

Compare

Buy all Datakom products like generator controllers, energy meters, panel meters, synchronization controllers, auto mains failures (AMF), auto transfer switches (ATS), etc, online in Pakistan. You can buy DKG109, an advanced generator controller online, or by visiting Electronic Power House (EPH) and Tetralink Technologies (TLT) in Lahore who are the authorized distributor of Datakom in Pakistan. All original Datakom products are available at very reasonable and best prices in Pakistan.

Features

  • True RMS measurements
  • Automatic mains failure
  • Engine control
  • Generator protection
  • Built in alarms and warning
  • Dual genset mutual standby operation
  • Load shedding, dummy load
  • Gas engine support
  • Engine idle speed control
  • 3 phase mains voltage inputs
  • 1 phase genset voltage inputs
  • 1 phase genset CT inputs
  • Engine oil pressure measurement
  • Engine coolant temperature measurement
  • Fuel level measurement
  • Genset active power measurement
  • Genset power factor measurement
  • Engine rpm display
  • Remote Start operation available
  • Mains simulation input
  • Engine Idle speed control
  • Periodic maintenance request
  • Engine hours counter
  • Event logging with complete measurement values
  • Stores last 100 event
  • Statistical counters
  • 3 level password protection
  • Programmable parameters
  • ll parameters field adjustable
  • Return to factory settings enabled
  • Logic level serial port
  • Firmware downloadable from serial port
  • Free MS-Windows Remote monitoring
  • SW:-monitoring and control- download of parameters
  • Modem call in case of alarm
  • MODBUS communication
  • 128×64 graphic LCD display
  • Triple language support
  • Customer logo display capability
  • Configurable analog inputs: 3
  • Configurable digital inputs: 5
  • Configurable digital outputs: 2
  • Total digital outputs: 6
  • Survives cranking dropouts
  • Sealed front panel
  • Plug-in connection system for easy replacement
  • Dimensions (96x96x53mm)

 

Click Here To Download DKG109 User Manual

 

brands

DATAKOM

color

Black

Technical Specifications

Alternator voltage: 0 to 300 V-AC Phase to Neutral (0 to 520 V-AC Phase to Phase)
Alternator frequency: 0-100 Hz.
Mains voltage: 0 to 300 V-AC Phase to Neutral (0 to 520 V-AC Phase to Phase)
Mains frequency: 0-100 Hz.
Current input range: 0.1 ? 6 A AC
Voltage burden: < 0.1VA per phase
Current burden: < 0.5VA per phase @ 5A AC
Accuracy:
Voltage: 2.0%+1digit
Current: 2.0%+1 digit
Frequency: 0.5%+1 digit
Power(kW,kVAr): 3.0%+2digit
Power factor: 3.0%+2digit
DC Supply range: 9.0 VDC to 30.0 VDC
Cranking dropouts: survives 0 V for 100ms
Typical stand-by current consumption: 100 mADC.
Maximum current consumption: 200 mADC.
Generator/mains contactor outputs: 16 A @ 250 VAC.
DC outputs: 1A @ 28 VDC. Protected semiconductor outputs.
Charge alternator excitation current: min 150 mADC @ 10 to 30 VDC.
Current inputs: from current transformers, …/5A. Max load 0.7VA per phase.
Digital inputs: input voltage 0 – 30 VDC. Internally connected to battery positive via 4700 ohm resistor.
Analog inputs: Resistor input 0 to 5000 ohms connected to the battery negative. Sources 10 mA when
closed to battery negative.
Measurement category: CAT III
Air category: Pollution degree II
Communication port: logic levels. 9600 bauds, no parity, 1 stop bit.
Operating temperature range: -20?C to +70?C (-4 ?F to +158 ?F)
Storage temperature range: -40?C to +80?C (-40 ?F to +176 ?F)
Maximum humidity: 95%, non-condensing
Dimensions: 96x96x53mm (WxHxD)
Panel Cut-out dimensions: 92x92mm minimum.
Weight: 200 g (approx.)
Case material: High temperature, self extinguishing ABS/PC (UL94-V0)
IP protection: IP65 from front panel, IP30 from the rear

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DKG109 Automatic Mains Failure Unit”

There are no reviews yet.